Fri frakt över 5 000 kr exkl. moms4,7 · 114 recensioner
Quick start and adjustment. 5 minutes heat up time. Single phase 220-240 V. No compressed air required. For PVC, melamine, veneer and ABS tapes (included 3D and glass effect). Possibility to use tapes up to 3 mm thick. Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation. Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel. Gluing roller with polymerization processing which helps to reduce the glue consumption. Glue pot covered by Teflon® for an easy cleaning and maintenance. Excellent finishings without adhesive residue due to the double flat scraper. High performance. Up to 120 m of continue edgebanding with the glue pot content. Panel thickness from 13 up to 50 mm. Suitable for lightweight panels as well. Standard equipment Belt feeder unit Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer Flat scrapers at both sides of the panel Front and rear flush cutting Table extension Bits included as standard equipment 8540183 Upper bit Ø60 Z4, r:2, 10° bevel 8540184 Lower bit Ø60 Z4, r:2, 10° bevel
Input power: 3450 W
Min. panel thickness: 13 mm
Max. panel thickness (for tapes from 0.4 to 2 mm): 50 mm
Max. panel thickness (for 3 mm tape): 25 mm
Min. panel width: 102 mm
Min. panel length: 180 mm
Adjustable working temperature: 110°-200°C
Working speed: 4 m/min
Trimming unit no-load speed: 10000/min
Trimming bits: Ø 59, Z4, R2, +10°
Voltage (single phase): 220-240 V
Dimensions: 1720 x 950 x 1350 mm
Weight: 150 kg
241 recensioner
Genomsnittligt betyg – 241+ verifierade kundrecensioner
Vad våra kunder säger om Ernst P.
“Personal var extra trevlig och kunnig. Starkt rekommenderar”
“Precis vad jag förväntade mig av produkten.”
“Snabb leverans. Återförsäljare av världens bästa trälim. Kvalitet kostar lite extra men det är det värt. Galet bra lim.”
“Födelsedagspresent till en mycket glad pojkvän”
“Toppen, äntligen har jag hittat sandpapper till min slipmaskin. Beställer snart mer.”
“Bra sortiment och pris, fin service och leverans, tack!”
“Produkt helt enligt förväntan. Servicen fantastisk! Ett nöje att handla hos Ernst P.”
“Hjälpsam och trevlig support och bra produkt. Jag är jättenöjd med allt.”
“Personal var extra trevlig och kunnig. Starkt rekommenderar”
“Precis vad jag förväntade mig av produkten.”
“Snabb leverans. Återförsäljare av världens bästa trälim. Kvalitet kostar lite extra men det är det värt. Galet bra lim.”
“Födelsedagspresent till en mycket glad pojkvän”
“Toppen, äntligen har jag hittat sandpapper till min slipmaskin. Beställer snart mer.”
“Bra sortiment och pris, fin service och leverans, tack!”
“Produkt helt enligt förväntan. Servicen fantastisk! Ett nöje att handla hos Ernst P.”
“Hjälpsam och trevlig support och bra produkt. Jag är jättenöjd med allt.”
Skickas normalt inom 4–7 vardagar.
Quick start and adjustment. 5 minutes heat up time. Single phase 220-240 V. No compressed air required. For PVC, melamine, veneer and ABS tapes (included 3D and glass effect). Possibility to use tapes up to 3 mm thick. Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation. Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel. Gluing roller with polymerization processing which helps to reduce the glue consumption. Glue pot covered by Teflon® for an easy cleaning and maintenance. Excellent finishings without adhesive residue due to the double flat scraper. High performance. Up to 120 m of continue edgebanding with the glue pot content. Panel thickness from 13 up to 50 mm. Suitable for lightweight panels as well. Standard equipment Belt feeder unit Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer Flat scrapers at both sides of the panel Front and rear flush cutting Table extension Bits included as standard equipment 8540183 Upper bit Ø60 Z4, r:2, 10° bevel 8540184 Lower bit Ø60 Z4, r:2, 10° bevel
Input power: 3450 W
Min. panel thickness: 13 mm
Max. panel thickness (for tapes from 0.4 to 2 mm): 50 mm
Max. panel thickness (for 3 mm tape): 25 mm
Min. panel width: 102 mm
Min. panel length: 180 mm
Adjustable working temperature: 110°-200°C
Working speed: 4 m/min
Trimming unit no-load speed: 10000/min
Trimming bits: Ø 59, Z4, R2, +10°
Voltage (single phase): 220-240 V
Dimensions: 1720 x 950 x 1350 mm
Weight: 150 kg

Quick start and adjustment. 5 minutes heat up time. Single phase 220-240 V. No compressed air required. For PVC, melamine, veneer and ABS tapes (included 3D and glass effect). Possibility to use tapes up to 3 mm thick. Glue temperature adjustment controlled by microprocessor, which avoids the temperature oscillation. Motorised pressure gluing roller to ensure the perfect edgebanding from the beginning of the panel. Gluing roller with polymerization processing which helps to reduce the glue consumption. Glue pot covered by Teflon® for an easy cleaning and maintenance. Excellent finishings without adhesive residue due to the double flat scraper. High performance. Up to 120 m of continue edgebanding with the glue pot content. Panel thickness from 13 up to 50 mm. Suitable for lightweight panels as well. Standard equipment Belt feeder unit Motorised top and bottom trimming unit with TCT bits r=3 + 10º chamfer Flat scrapers at both sides of the panel Front and rear flush cutting Table extension Bits included as standard equipment 8540183 Upper bit Ø60 Z4, r:2, 10° bevel 8540184 Lower bit Ø60 Z4, r:2, 10° bevel
Input power: 3450 W
Min. panel thickness: 13 mm
Max. panel thickness (for tapes from 0.4 to 2 mm): 50 mm
Max. panel thickness (for 3 mm tape): 25 mm
Min. panel width: 102 mm
Min. panel length: 180 mm
Adjustable working temperature: 110°-200°C
Working speed: 4 m/min
Trimming unit no-load speed: 10000/min
Trimming bits: Ø 59, Z4, R2, +10°
Voltage (single phase): 220-240 V
Dimensions: 1720 x 950 x 1350 mm
Weight: 150 kg